reinput 1 {\127}
On an old FreeBSD 1.1 system, these entries were added to
of these ports, the ``Printing'' section of the handbook is very
Reported by: Mike Smith msmithatrad.adelaide.edu.au
printing something.  To print with the LPD system, you use the command
bad144 run.
If you are not using the ``proxy ARP'' method for routing packets
        Now it is up to the device connected to that DMA channel to
On a SCSI bus, each possible pair of devices can communicate. Whether
The lpr command supports a number of options that control formatting
If you do not want people sending X sessions to your internal network
        Memory-mapped file system.  This is basically a RAM disk for
teak|hp|laserjet|Hewlett Packard LaserJet 3Si:\