November 2006


Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Chemistry Club <[log in to unmask]>
XP Software <[log in to unmask]>
Tue, 7 Nov 2006 08:35:32 -0600
text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
XP Software <[log in to unmask]>
text/plain (131 lines)
Christopher has uploaded some new software for you!

Click here to view available updated software:

In modern systems there are two types of Break signals.  If the Break
Beware of multiple devices configured to use the same ID. Chaos
So what we used to call a NS16550AFN (DIP Package) is now called a
your login and password in this script , also you will need to change  Kernel Configuration
/compat/linux/lib/ ->
which indicates that this particular system's Ethernet MAC address is
working title for the project being "386BSD 0.5" or "386BSD Interim"
disk space a user or group may allocate, and how many files they may
The sender does not know when the receiver has "looked" at the value
o  Zynx      ZX342
To use the info(1) command, simply type:
In the following example, we start with a skeletal /etc/printcap that
actually a gzip'd cpio file).  You can create this floppy in the same
If you want to run doom or other applications that need shared memory
How do you handle other file formats, though?
command line are treated as part of a single job.  It is the currently
are suitable for 9-track tapes (6250 bpi), not the high-density media
device sd0
These keywords are required in every kernel you build.
compiled binaries either via ftp or CD-ROM.  If in doubt, please
(symbolically) a temporary file name (one that ends in .dvi) to
# Quit answering ARP requests for the SLIP client
10.4.11.  * Sound cards
To join this list, send mail to <majordomoFreeBSD> and say:
targets `pre-<something>' or `post-<something>', or put scripts with
ipfw -a l
        SLIP or PPP
FreeBSD audience, invariably assuring a better (or at least faster)
o  BOCA IOAT66 6 port serial card using shared IRQ.
cvs-ports         /usr/ports           Ported software
you need only enough disk space to build the ports you want.    (Almost)
in your kernel's config file.  It is included in the GENERIC kernel,
Ethernet MAC address whenever a another IP node on the Ethernet asks
[then the special rules, in the order they are called]
speed of the interface is higher, 10 or 15 Mbits/second instead of the
the product will compare favorably in market comparisons even though
requirement for copying encrypted passwords from different hosts
ctm_rmail program directly from a entry in /etc/aliases if you want to
                                     room for more
CTM is a method for keeping a remote directory tree in sync with a
the tape at target ID 6 is wired down to unit number 1. Note that
its.    Simply change the value you want updated to modify the quota
2.  Installing FreeBSD
retrieve the ``tarball'' if it is not available on the local system.
#  /etc/printcap for host rose - added text filter
actually being sent over the media, not the amount of data that is
chmod 555 /mnt/sbin/fsck /mnt/sbin/mount /mnt/sbin/halt
RSA Data Security, Inc., MD4 secure hash function) iteration-count
freebsd-platforms          Concerning ports to non-Intel architecture platforms
        Update packet counters but do not allow/deny the packet based on
questionsFreeBSD> .  This will keep you informed of build-
Reported by: J"org Wunsch
o  Fix the syscons ALT-TAB/vt switching hangs.  Coordinator: Soeren
sio3 at 0x2e8-0x2ef irq 9 on isa
o  Enhanced Small Device Interface (ESDI) [X3.170-1990/X3.170a-1991]
Do not forget to add them to pkg/PLIST too!  (Do not worry about
To add a /dev entry for a port:
It then loads the first 15 sectors at 0x10000 (segment BOOTSEG in the
If you're looking for high-speed serial networking solutions, then
additions to /etc/printcap:
On FreeBSD-stable you need to add the following as well:
(note the extra ``s'') as the results can be confusing.
win. This also means that the SCSI host adapter usually uses target ID
21:#11 0xf01932a1 in exception:calltrap ()
o  Computer Systems Research Group, UC Berkeley.  4.4BSD Programmer's
how many bytes are to be transferred is decremented.
command to move it into place on the original system:
# ln -s /cdrom/ports/distfiles distfiles
Instead, the filter will make the symbolic link in the current working
lock up, first check the ``supported         configurations'' section of
# cd /usr/ports/directory
input 1 {Username: }
o  SMC Elite 16 WD8013 Ethernet interface, and most other WD8003E,
There is one other type of configuration that we should cover, and
``out of the box'', but this is unfortunately rather rare. With most
                      the received data.
program that LPD runs when it has a job to print.  When LPD runs the
There are special terminators you can stick onto a flat cable bus.
that can evolve in the commercial use of GPL software, we do, however,
        reasons IRQ 2 = IRQ 9) in order to access it from FreeBSD.  If
For a variable-speed configuration, you will need to configure your
used to refer to a machine that sits on two local-area networks.
o  FN:  Fast Narrow
performed on all of the control signals so that each device will see
5.3.5.  SCSI Device Support
your system at all.  If you plan on installing via anonymous FTP, then
host is allowed to control compression
times, once for each byte.  Each time a byte is transferred, the
even to send an ICMP message back to the originator.    Only the first
have not installed the system sources already (srcdist/srcsys.?? in
and general performance..
IP router, or install gated on your FreeBSD SLIP server and configure
bus.    For wide buses this increases to the number of data lines.  Parallel Ports
drive, C35470A DDS format DAT drive, C1534A DDS format DAT drive, and
/dev directory before you can use them.
A shell script called MAKEDEV in the /dev directory manages the device
          processes each of them will be running.  One keyword
o   Data Terminal Ready (DTR)
Reorganization of the source tree for multiple platform ports.
The command modifier (b/h/w) specifies the size of the data to be
non-``fly-by'' mode, but nobody in the PC industry uses this
1. Dial up, type "slip" at the prompt, enter your machine name and
archivers/unzip subdirectory of your ports tree to build and install
packages also make it highly useful to those who's primary interest
with the lpr command:
version), or one which just lets you send data to it as if you were
                      and 8-bit data words, 2 Stop Bits are