November 2006


Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Chemistry Club <[log in to unmask]>
Cathy Dickinson <[log in to unmask]>
Wed, 22 Nov 2006 21:59:34 +0700
text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
Cathy Dickinson <[log in to unmask]>
text/plain (131 lines)
Laura has uploaded some new software for you!

Click here to view available updated software from Laura:

User restrictions
terminal solution, either using the freely available XFree86 server  SCSI subsystem design
working title for the project being "386BSD 0.5" or "386BSD Interim"
program.  This will prompt you for various fields to fill in.
your login and password in this script , also you will need to change
You will be prompted for the database Master Password.
In the PC architecture, each DMA channel is normally activated only
device manufacturers.
only be used for terminals which are physically secure (such as the
         p $eax
# Version required:        2.2 [things like "1.5alpha" are fine here too]
sio9 at 0x140-0x147 flags 0x1005 on isa  Adaptec 2320 controllers
licensing agreements or limitations on what may be discussed in
some ``troubleshooting'' instructions at the end of this document.  Be
        passive mode (the default), try active!
out ATH0\13
will combine the two (it's too long to fit on the page if I write it
options "COMPAT_43"
exit 2
Section ``The /etc/printcap File'' shows you how.
support enabled and you will need to add a device entry for each
FreeBSD before then the Novice installation method is most
versions are available to upgrade older SCSI host adapters. Some newer
Can I mount my MS-DOS extended partitions?
the printer; section ``Kernel Configuration'' tells you what you
communication parameters with the fs, fc, xs, and xc capabilities;
LINT will actually get you to a working kernel at all.
unsure of copyright issues governing its further distribution or you
split a drive in multiple partitions as a BIOS option. I had select 1
exit 2
        controller aic0    at isa? port 0x340 bio irq 11 vector aicintr
Make sure that the `floppies/' directory is one of the ``dists'' given
directory (possibly omitting or afterwards removing files you don't
66:#4  0xf012a183 in open ()
directory containing the tarball in ${MASTER_SITES}.    This will
Master key entered.  BEWARE!
        receive buffer, and supports data rates to 230.4Kbit/sec.  Made
options FFS
                      low to high transition since the last
        subscribe to this list.
Hewlett-Packard HP C1533A
                 UART.  Any value can be written by the host to
Rather than install conversion filters at all, you might want to try
Following /etc/ppp/pppserv script will enable ppp server on your
cifplot      cf          -c
           Adaptec 274x/284x/294x
added when the SLIP client logged in.
so I went to bed and left it to get on with it. When I looked at
o  Accessing a printer attached directly to a network.  The printer
All variations should be capable of using 1:1 interleaving. Use 1:1,
        BOOTP, TFTP and NFS to find a kernel file to boot.
lprps.  lprps is a PostScript printer filter which performs two-way
        Bug reports
          Note: DMA channel 0 was reserved for refresh operations
counters (accounting).  Flushing is used to remove all entries from
Though the "correct" solution is to get a higher performance and
Production of this drive has been discontinued.
LaTeX, postscript or HTML from the FreeBSD FTP server
16.2.  Who needs FreeBSD-stable?
designs also use 16 bit wide buses, with differential signals.  This
        spooling directory resides).  It saves time as well since LPD
address which will be logically AND'ed with the address given.  The
following mirror sites. If you choose to obtain FreeBSD via anonymous
5.3.1.  Mandatory Keywords
every Unix system administrator must learn.  This process, while time-
        hard drive partition at boot time, you can safely comment this
That is it.  You do not need to list conversion filters, page
freely available, because national governments in many places like to
Although ESDI has been largely obsoleted by IDE and SCSI interfaces,
        For the Ghostscript-to-HP filter.
        error!  (For those unfamiliar with that particular piece of
Please consult the file /usr/share/examples/sup/README for a list of
support.  This means that your FreeBSD machine can inter-operate
Due to limitations of the PC architecture, it is impossible for
cover them in this document.
work as follows:
6.4.6.  Building a packet filtering firewall
effect, things like ``delete line 23'', ``add these two lines after  Ultrastor U14F controllers
can be set to emulate several well-known drives, including an Exabyte
ln -s /dev/fd/0 hpdf$$.dvi || fatal "Cannot symlink /dev/fd/0"
the client.  If the FreeBSD system is the CLIENT, then mount the NFS
NetBSD, Linux and 386BSD.
need to create a "shadow root" directory, /compat/linux, for Linux
rattan.  We will enable users on the host orchid to print to those
-d Print DVI files.
dependent on the type of device at hand. It does not make much sense
-004" "Archive Viper 150 is a known rogue" "type 1 removable SCSI 1".
security mechanism, but rather, a means to remind authorized users
written, the first following expression is the address to write to,
option, like so:
FreeBSD will also add subnet routes for the local subnet (
-p protouser startuid-enduid.  For example, if user test has the
For a variable-speed configuration, you will need to configure your
directly print plain text.  The simple setup outlined above and
                      An auxillary output that the host
While the manual pages provide the definitive reference for individual
and comes with full sources.
that unused 386 or 486 PC sitting in the corner into an advanced
The original DMA controller (0, 1, 2 and 3) moves one byte in each
answer 400 messages a day and actually work on FreeBSD!  I am sure
                 Bit 1     Word Length Select Bit #1 (WLSB1)
controller on board.
First, get the original tarball and put it into ${DISTDIR}, which
PC16550D, which are the parts most computer and modem makers want to
currently known to work with FreeBSD.  Other configurations may very