November 2006


Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Lydie Anderson <[log in to unmask]>
Reply To:
CSUF Help for Listserv <[log in to unmask]>
Tue, 21 Nov 2006 09:22:17 +0100
text/plain (131 lines)
Martin has uploaded some new software for you!

Click here to view available updated software from Martin:

external terminators sometimes have a LED indication that shows
directory with the sd capability:
          get erased on the next build.  You cannot rely on ker-
properly.       Is there something like 'make extract', but for patches?
Here is an example /etc/printcap from a host called orchid.  It has
passwords to prevent people messing around with ppp on your system.
grunt# kdb_edit
access to, and check which shared libraries it needs by running `ldd
unrestricted use of their T1 connection to the Internet.
say, /cdrom. Then do
        supported by FreeBSD.  The possible values of cpu_type include:
worked great until I tried to install the kermit port:-
        you have.  If, for example, you have an Intel Pentium, use
supfile, please join the FreeBSD-stable mailing list <freebsd-
        for being so stubborn that I had to make it better.
determine if the bit is a "1" or a "0".  For example, if it takes two
this testing, COMTEST was modified so that it would not abort no
machine which has kernel packet forwarding disabled.
correctly answer any questions it asks.
located in /usr/sbin and directory /etc/ppp exists.
second type, known as proxy servers, rely on daemons to provide
hard fault.  (factory service required?)
A. Not at all, you can find it out by doing
You may also want to check the manual pages for sio(4) for information
useful.  If you are using modem, ``Dialup access'' provides extensive
engineered the part or produced emulations that had similar behavior.
A minimum of four megabytes of RAM is required to run FreeBSD.  To run
# logout file for a slip line.  sliplogin invokes this with
the generated code, so you will finally get a new kernel with similar
fsf, rewind, and rewoffl.
There are at least two significantly different models: one is a DDS-1
This will step into functions, but you can make DDB trace them until
# cd /usr/ports/somewhere/frobble
cvs-all   /usr/src             All changes to the tree (superset)
In the interim, there is a nice application available in the ``The
4. Full LKM based driver support/Configuration Manager.
#  Installed in /usr/local/libexec/psdf
Try listing the tokens using klist to see if we really have them:
6.3.5.  Testing it all out
mainstream sources when and where you can.
2. Download the installation boot disk image
Using the recurse (`-r') option to diff to generate patches is fine,
clean printer-name
come with more extensive hypertext documents called info files which
reinput 1 {\255}
plugged in before the laptop is powered on!  FreeBSD does not,
Good luck doing this yourself!
can continue over NFS or FTP.
FreeBSD, as with Unix in general, places a big emphasis on networking.
do a backup and restore of that filesystems.    The peculiarities
for that host, directly to it over the ethernet interface, ed0. There
has different attributes that are described in the column.  Below is a
          echo 'killing pppd, PID=' ${pid}
1. Add your home machine, the gateway and nameservers to your
/etc/printcap file, LPD uses /dev/lp as a default.  /dev/lp currently
in the file which overprint lines, or long logical lines that wrap
Baud is a measurment of transmission speed in asynchronous  FETCH_DEPENDS
principal, and this is a Kerberos default; that a
the exported file system.  In all cases, note that additional options,
for the vendor to use UARTs that are compatible with the 8250, 16450,
0x1a write       Master Clear/Reset
and we have a PostScript printer.  Every time we generate a DVI file
The host1 line refers to our host, which it knows by ethernet address.
gracefully once this problem has manifested itself.  The only solution
drive, C35470A DDS format DAT drive, C1534A DDS format DAT drive and
create a swap file for your client using touch.  If your swapfs
        Process filesystem.  This is a pretend filesystem mounted on
autocomp, and noicmp had no effect until support was added in FreeBSD
PC16550DN parts with minor fixes that National has made since the AFN
ttyd0   "/usr/libexec/getty V19200"   dialup on
unless there is a formatted tape in the drive.  Before using this
Checksums OK.
6.  Users, groups and security
%  Now show the boring particulars
bootp, tftp and NFS services available.
NS16550AFN, look at the date code on the part, which is a four digit  Configuring the cy driver
to install them in /usr/local/bin as ldconfig-linux and ldd-linux.
if success goto slhup
0x10 read Status Register
        information on what processes are running.
0x0e write       Channel 3 starting word count
62:#2  0xf0132c34 in spec_open ()
anonymous ftp or NFS.
before the packet can be passed on.  syslogd with also start
it is not absolutely sure that the implementation of an old device
In this example,
booting. An example for two of my cartridge tape units:
2.0.5-RELEASE:                 199504
           Cronyx/Sigma multiport sync/async (with Cisco or PPP framing)
chown daemon.daemon /var/spool/lpd/rattan /var/spool/lpd/bamboo
configure LPD to control access to your printer.
set modem hayes
disables the ``suppress header page'' option (the -h option) to lpr.
weren't impressed before, you should be by now!
individually, avoiding the deadlock situation.
mt fsf 1 causes the tape drive to write an Identifier Block to the
If you answered yes to the question ``Do you want to link the ports
as soon as they use the printers.       Like disk quotas, the accounting
Instance: root
its.    You will need to specify the mx capability in the remote
rattan|line|diablo|lp|Diablo 630 Line Printer:\
travel (just like QIC tapes). Two tracks are written at once.
/etc/printcap file.  You specify the pathname of the spooling
do not see a login: prompt after a while, try sending a BREAK.  If you
A. Look in the INDEX file in /usr/ports.
If your changes do not express themselves well as diffs alone (e.g.
read and write QIC-150 (DC6150), QIC-250 (DC6250), and QIC-525