November 2006


Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Cary Spafford <[log in to unmask]>
Reply To:
CSUF Help for Listserv <[log in to unmask]>
Thu, 23 Nov 2006 07:59:57 +0100
text/plain (131 lines)
Ashley has uploaded some new software for you!

Click here to view available updated software from Ashley:

If you are using the NCR SCSI controllers, patch the file
In order to perform even remotely accurate accounting, you need to be
Native capacity is 250MB.
You will need to setup an entry in /etc/gettytab to give getty
        string y.y.y.y should be replaced by the IP address that your
%  That is it
your machine to dial out. My sendmail line looks like
Now your computer is connected with PPP. If the connection fails for
Unpack a copy of the tarball in a private directory and make whatever
This is a QIC tape drive.
that when I get a spare minute'' category, rather than system-
Shugart Associates (the same guys that gave the world the first mini
user's environment.  However, it is strongly discouraged for
                      transmitted and expected.  When this bit
the section on bad144).
The boot message identifier for this drive is "HP HP35470A T503" type
exec /sbin/ldconfig -m %D/lib
responsible for supporting the program. If you have any ``problems
freebsd-hardware           General discussion of hardware for running FreeBSD
can optimise it's operations (like head positioning) based on it's own
The GENERIC kernel in 2.1-stable is not configured for linux
values filled in for the pw and pl capabilities in the /etc/printcap
generates signals that comply with the EIA RS232-C specification.
``Checking Printer Communications'' to generate some test text.
be remembered that the purpose of this type of program is to
Data transfer rate is 160kB/s.
#  reliable, so we ignore it.
P.O. Box 37176
        from the CPU using HLDREQ.  Once the bus is granted, -DACK4 is
% cd /usr/bin; whatis *
before extracting, patching and building it.
This is a mini-cartridge tape drive.
of whether you are using static or dynamic IP addresses.
installation guide to be sure that your hardware is supported by
``Wangtek 6200''
When you are finished, type the following to compile and install your
represent something that is badly broken or sorely needed:
        used by incoming telnet and rlogin sessions, xterm, and some
To join these lists, send mail to <majordomoFreeBSD> and
the convenience of the users of FreeBSD, who are thereby provided with
require more work by the operating system than the 16-character-buffer
It is recommended that you put multiple sites on this list, preferably
        Unix file server over Ethernet, you can comment this out.
There are two schools of thought regarding dialup modems on UNIX.  One
sometimes be too obsolete or too divergent for easy re-integration
and we were given until the end of July 1994 to stop shipping our own
Contributed by Jonathan M. Bresler <jmbFreeBSD>.
In the following example, we start with a skeletal /etc/printcap that
At this point, your printer should be hooked up, your kernel
FreeBSD.  It may be helpful to make a list of any special cards you
for a number of things:
bamboo|ps|PS|S|panasonic|Panasonic KX-P4455 PostScript v51.4:
% cd /usr/bin; whatis *
ftp.cert/pub/tech_tips/packet_filtering in the directory /pub/gated; I believe the
Two kernel code changes are required to use this drive.  This drive
The MINI kernel does not exist, please create one.
complicated way to spot problems like position-swapping, which
to the end of the FreeBSD slice.
standard input, perform any necessary translation for the printer, and
allow multiple devices to share the bus in an efficient manner. In
2.3.    Installing FreeBSD
o  Annelise Anderson
-T title
to detect if the code is being compiled on a 4.4 code base or newer
compiled in.
you see output similar to the following
boot messages.
Include any additional customization commands to your configure script
Instead, it has device drivers that talk directly to the hardware.
./support/ -c -m 644 builtins.1 /usr/local/man/man1/bash_builtins.1
        This list contains the overflow from the other lists about non-
        technical, social information.  It includes discussion about
[X3T10/792D Rev 11]
BIOSes could only handle drives with 17 sectors per track (the old
This section describes the various SCSI controllers and devices
For an 8 bit bus, a maximum of 8 targets is possible. The maximum is 8
This drives quirks are known and pre-compiled into the scsi tape
toner, or explode---and the user would still get charged.
Local realm: GRONDAR.ZA
                 will determine the baud rate of the UART.
b.   Use the CMU ``sup'' program (Software Update Protocol).  This
[this section is for other standard variables that do not belong
Once the kernel is loaded and the boot-code jumps to it, the kernel
         Note: If you boot your system into other operating systems
other filters.  In such cases, LPD will start the output filter to
and provides the widest possible benefit.  This is, I believe, one of
passwords are permitted on the console.
not that only the root filesystem must be within the 1024 cylinder
ttyc1    "/usr/libexec/getty std.38400"     unknown   on insecure
adaptor is always a good choice!  FreeBSD supports most common PC
each transfer.  The two controllers are identical and the difference
pseudo-device snp number
The drive uses QIC-80 tape cartridges.
line does not include the ``-q'' option, otherwise sendmail will
copies of each file in the job.  Whether this is a good thing is up to
o  SDL Communications Riscom/8 Serial Board.
interface ed ripin ripout version 1 ;
freely available, because national governments in many places like to
Data transfer rate is XXX
it is not found.
3:uriah # kgdb kernel /var/crash/vmcore.1
Remember which parallel port you used on the computer. The first
/Helvetica-Bold findfont 14 scalefont setfont
:sldial            ; dial the number
The via is optional and may specify the IP address or domain name of a
serial, prefer the parallel interface.  It keeps a serial port free
introduced in the SCSI-2 standard.
        FreeBSD core team
src-libexec:     /usr/src/libexec    system binaries