gladly accepted by the FreeBSD Project:
V Amanda
i
a 69406
g
r Amanda
a 15917
U
n Amanda
d
e
r 19247
3 Amanda
D
o 75182
l
l
a Amanda
r
s 28685
http://snt.erifarm.com/
-wwidth -llength
companies internal network and the ``Big Bad Internet'' will
capability. LPD will store jobs here before they get sent to the
Data transfer rate is 510kB/s (native).
number of freely available CAD, mathematical and graphic design
The USR Sportster 14,400 external modem also has some DIP switches
Result codes should be disabled/suppressed for dialup modems to avoid
wire is actually connected to DRQ4 on the primary DMA
command:
The second scenario is a hot-key on the keyboard, usually Ctrl-Alt-
% linux
# mkdir databases
freebsd-user-groups User group coordination
COMTEST does not reveal a lot about what differences are important and
prompt comes up, type -c. This puts FreeBSD into a configuration mode
buy but are sometimes unwilling to pay the price required to get the
you damage your system or lose data due to attempting to follow the
UART considers the entire word to be garbled and will report a Framing
o ftp5.jp.FreeBSD/pub/FreeBSD
Stay away from low-level formatters that mark all sectors of a track
4850 ?? I 0:00.09 /usr/libexec/getty V19200 ttyd0
17.
second 8237 chip, and numbered those channels 4, 5, 6 and 7.
urgency:
set to whatever machine has a direct connection to the outside world
include <bsd.port.mk>
8mm (Exabyte)
(everything described in this section -- in particular do not include
6.2.6. Restricting use of UNIX passwords
This is a DLT tape drive.
In general, you have to have root privileges to use the lpc command.
of if Kerberos is not running, simply delete the extra files with rm.
This is a QIC tape drive.
addition to the fine work provided by CSRG, the FreeBSD Project has
es-0.9-beta1 es-0.9b1 ditto
hardware (RTS/CTS) flow control. You can add stty commands to
# logout file for a slip line. sliplogin invokes this with
whole trees. e.g. you see:
import proto rip interface ed {
#
queue, transfer of jobs between queues, and queue redirection
127.0.0.1 localhost
However, if you like you can decide to replace the libc.so anyway, and
The first 20 items are from Terry Lambert <terrylambert>
o Wells, Bill. "Writing Serial Drivers for UNIX". Dr. Dobb's
First, this is the sequence of events which occurs when the user first
contains various statements that specify how the port should be
In one case, the machine as two ethernet cards, each having an address
to be transmitted. The Start Bit is used to alert the receiver that a
Pseudo-device drivers are parts of the kernel that act like device
To further test the printer, try downloading larger programs (for
will not show up in the output from the quota command, even if they
for enhancements or bug fixes. Suggestions with accompanying code
config kernel_name root on root_device
/sys/i386/conf) and examine your kernel configuration file. It needs
address masks, subnetting, routing, and routing protocols, such as
sl1* 296 <Link> 0 0 0 0 0
connected to that modem is a DTE device. The DCE device receives
initialization devices (/dev/ttyid? and /dev/cuai0?) and locking
tarballs handy on my system so I don't have to wait for a download
F20 is pushing the limits quite a bit, so you'll quickly find out if
for the printer you are debugging in the /etc/printcap file.
you damage your system or lose data due to attempting to follow the
src-usrsbin: /usr/src/usr.sbin system binaries
Note: the `-m' option is new since 2.0.5 and 2.1.0-950726-SNAP, so do
automatically discards the Start, Parity and Stop bits. If the sender
users can easily find jobs they have printed in a stack of
Modern SCSI devices, particularly magnetic disks, support what is
following line to your kernel configuration file:
Equivalent to start followed by enable.
command to do this:
This slip.login file merely ifconfig's the appropriate SLIP interface
ftp.cert/pub/tech_tips/packet_filtering
reinput 1 {\127}
to:
return or CR). Many printers use the MS-DOS convention for repre-
listed by clicking on their names. If no coordinator has been
Modern modems also include buffers that allow the rate that bits move
v51.4.
[...]
Printer received LF Printer prints CR + LF
If the file is for a client system, and the network is not deemed
(Approved)
10.2.4. * BIOS
12.1.3. Check the tun device
current from the 2.0-RELEASE sources.
To allow access to the SUP server on sup.FreeBSD, use the
The drive has a block of 8 dip switches. The proper settings for
are ethernet hardware addresses. FreeBSD will automatically identify
reboot. Remember that, depending on the severity of previous
it is not absolutely sure that the implementation of an old device
10.4.1.1.1. Physical connections
The printer never advanced a line. All of the lines of text
istrator has moved the whole `/usr/local' tree somewhere else.
gladly accepted by the FreeBSD Project:
through this pseudo-device. Mandatory.
supply and take-up spools located inside the tape cartridge itself.
ports-security: /usr/ports/security ``security'' utilities, for better or for worse
:if=/usr/local/libexec/hpif:
Sometimes sites combine the two types of firewalls, so that only a
You should also specify the rw capability; that tells LPD to open the
1. Add the cy device to your ``kernel configuration'' (note that your
Please see the BSD System Manager's Manual chapter on ``Building
______________________________________________________________________
It bears repeating: make sure /etc/sliphome/slip.logout has the
You have reached the end of the simple LPD setup. Unfortunately,
/usr/local/Mathematica/lib/X11 for the XKeysymb file
capability in /etc/printcap.
directory, a directory where print jobs reside until they are printed,
Then again, all that might be too much trouble, and users will
The CTM program has been part of FreeBSD ever since version 2.0 was
The variable ${PREFIX} can be reassigned in your Makefile or in the
and so on, and then it needs to find a root filesystem.
filters. For example, suppose you would like to directly print
the Internet), you will probably either have to add static routes to
The host1 line refers to our host, which it knows by ethernet address.
In general, experiment with sector settings before you install FreeBSD
listing. Here is an example of lpq -l:
exec /usr/libexec/lpr/lpf "$" | /usr/local/libexec/netprint scrivener 5100
traffic. This can cause a problem for people (on the inside) using
2.00 orchid:zhang
the files listed here. The pathnames are relative to the installation
designs also use 16 bit wide buses, with differential signals. This
filter:
to send a complete byte plus Start, Stop and Parity bits. Most UARTs
reboot.
10.20.30.255 link#1 UHLW 1 2421
might want to seperate your older and newer (=faster) devices however.
In case of problems, please contact the hostmaster for this
message back to the source.
The first floppy that you will need in addition to the boot.flp image
inp 5 OK
``default route'' is used if none of the other routes apply. We will
receive FIFO that the host may read.
work, take a break and come back to it later. If it still does not
The configuration file /etc/skey.access can be used to configure
not forget to (W)rite out your new boot blocks! :-)
might be incomplete for some places, as can be seen in the stack trace
showpage
enough variation in even these simple tiny things to make finding the
advantage of the device's inherent parallelism.
10.20.30.255 link#1 UHLW 1 2421
sio3: type 16550A
address where the data is really supposed to be stored.
18.2.5.8. A Sample Makefile
cycling is implemented with the nx= (next table) capability. Each of
relevant (do not try 10 kVolts though..).
defaultroute # put this if you want that PPP server will be your
2.2 (unless your slip.login script included code to make use of the
until it receives reasonable characters.
0xc8 write Channel 6 starting address
cards, such as the Boca Board 1008 and 2016 (please see the manual
Note: At time of writing, lang/Sather does not seem to work on
enough variation in even these simple tiny things to make finding the
Data thruput ranges from 250kB/s to 500kB/s. Data sizes start at
(named(8)).
for anyone. If, however, you see the dreaded ``proc table
Berkeley packet filter. This pseudo-device allows network
/compat/linux/usr/X11/lib/libX11.so.3.1.0
and growing number of other systems. S/Key is a registered trademark
# New ports collection makefile for: oneko
packet on a broadcast network (e.g. an ethernet). These packets
:slhup ; hang up the phone
To continue the operation of an interrupted kernel, simply type
Hayes ESP
Depending on which version of FreeBSD you are running, how you get
start printer-name
There are three kinds filters you can specify in /etc/printcap:
and kernel. The procedures for configuring both types of PPP, and for
needs, and copy them to your FreeBSD system. Example: you have just
and the SMC EtherPower or Compex ENET32 cards for any serious PCI
can also add this to your supfile. But note that this collection is
symmetrical. The DTE device generates fewer signals for the DCE
/MAKEDEV std
crw-rw---- 1 uucp dialer 28, 193 Feb 15 14:38 /dev/cual01
or members of a group, may allocate on a per-file system basis. This
Data transfer rate is 600kB/s.
also run as an output filter. If you need a quick-and-dirty output
transmitting the next bit of the word.
is immediate. You can prevent users from printing when their
4.2.3.1. Compiling ports from CDROM
DISTNAME= xdvi
See also the ``pca0'' device.
6.4.4.4. Clearing the IPFW packet counters
dvilj2p, which converts DVI into LaserJet IIp, LaserJet III, and
will not show up in the output from the quota command, even if they
around this time, though they did not come fully into the project
common sorts of configuration statements:
set term bytesize 8
______________________________________________________________________
Mar 29 21:16:37 yedi /386bsd: aha0 targ 5 lun 0: <ARCHIVE VIPER 150 21247-005>
# change this line to <local_ip>:<remote_ip>
# place boot blocks on the floppy
In addition to the base distributions, FreeBSD offers a new ported
Setting this bit to "1" causes the UART
no major and minor version numbers in the software.
the official standard at hand:
kill -1 1
through a packet filtering router onto an internal network. Proxy
o Carrier Detect (CD)
version is "SONY SDT-5000 327M". The DDS-2 version has a 1MB cache.
of ${PATCHFILES} below).
5.3. The Configuration File
Networking support. Leave it in even if you do not plan to be
10.4.2.2.6. Bus layout
Proxy servers often have ways of restricting access further, so that
By using the sc capability, we prevent the use of lpr -#, but that
#
"V" LPCC (lead plastic chip carrier) J lead type
matching major revision numbers itself, you do not need to worry about
for it, you will need to run gated in place of routed on your FreeBSD
src-gnu: /usr/src/gnu sources under the GNU Public License
----------------------------------------------------------------------
system. The first, /etc/gettytab, contains configuration information
One important note - the actual UART chips for the Boca 16 are in the
The trick in setting this up is that the MSB of the flags represent
Same as NS16450 with a 16-byte send and receive buffer but the
entering the program, press CONTROL+D, or whatever your end of file
sure the operating system can successfully send data to your printer.
and foremost "mission" is to provide code to any and all comers, and
For an 8 bit bus, a maximum of 8 targets is possible. The maximum is 8
The boot message identifier for this drive is "HP C1533A 9503" "type 1
First, let uss make the shell script /usr/local/libexec/if-simple be a
to the law (PKP's patent on public key crypto, ITAR (export of crypto
probably not intended.
slattach. Then go back to kermit ("fg" if you suspended it) and exit
across a network, to control access to printers, and to do printer
o nic.funet.fi/pub/unix/FreeBSD/eurocrypt
debugging the simple printer setup, so we will suppress header pages.
packet on a broadcast network (e.g. an ethernet). These packets
Streams to allow the use of commercial streams drivers.
:if=/usr/local/libexec/psif:\
X.X.X.X is the IP address of the client. The contents of this file
internal modem on COM4 and a serial port at COM2 you will have
file, so it has no idea whom to charge for printer use. It is also
______________________________________________________________________
The SCSI subsystem of FreeBSD recognizes devices with bad habits by
(appears on Intel Altair board and several other Intel server
known to work on hand as a different name that will not
rattan|line|diablo|lp|Diablo 630 Line Printer:\
documentation for more details.
more important events first and the host
file will be in the spooling directory for a printer, in a file named
------------ ------------- ----------
The linux emulation in the -STABLE branch is capable of running Linux
distribution line.
/Helvetica-Bold findfont 64 scalefont setfont
o Shared libraries (the Unix equivalent of MS-Windows DLLs) provide
ipfw [-atN] l
FTP installation may be done from any mirror site containing a
Not hard-coding `/usr/local' or `/usr/X11R6' anywhere in the source
1.44 megabyte 3.5 inch floppy disks and 1.2 megabyte 5.25 inch
; put your userid here:
ftp'ed the Linux binary of Doom. Put it on the Linux system you have
Note: LPD prints a form feed character after the header page. If your
73:673 error = (*callp->sy_call)(p, args, rval);
This is the easiest mechanism if you have a trusted machine.
Proxy servers are normally more secure than normal servers, and often
real 16550, 16450, and 8250 UARTs all support these modes and COMTEST
"mathematica" and get a really slick looking Mathematica Notebook
Taiwan
over 1 to 20 drives, providing from 50GB to 9TB of storage.
rather than expecting the user to be able to work it out. They also
lines as your ISP provides nameservers.
grunt$ passwd
environment (and if the user sets the variable INTERACTIVE, then only
disks. The wd driver should work for all WD1003 compatible interfaces.
Master key entered. BEWARE!
devices, 16550A-based serial interface cards are much prefered. If
traffic your router is getting from a certain machine, or how much WWW
Sets the login string sequence. In this example, the string is
exit 1
subscription.
more of these extra signals. The function of each of these additional
cvs-all /usr/src All changes to the tree (superset)
keep people out of your internal network? FreeBSD can easily turn
c
simultaneously for a variety of things. System peripherals such as
even have the faintest idea what most of them actually do? Simply do
localhost localhost UH 0 181 lo0
UFS
won't need the source again, there's no point in keeping it hanging
extended, silly conversation between getty and the modem.
experimental system software. This is not because we are mean and
minimal difficulty for commercial vendors, but is a serious problem
To compute the dollar amount due, pac uses the pc capability in the
FreeBSD Handbook
Intel EtherExpress 16
Reflects the state of the DSR line on
ISBN 0-13-131509-9
General tape access commands
remote hosts. In this case, it acts just like a regular host
20.1. Debugging a kernel crash dump with kgdb
freebsd-isp Issues for Internet Service Providers using FreeBSD
|
